MP1627 LABLT Rear Coil Spring Spacer Lift Kit Chevrolet

Review LABLT Inch Rear Coil Spring Spacer Lift Kit Pair For Chevrolet for CHEVROLET BERETTA 1987–1996

The LABT MP1627 Rear Coil Spring Spacer Lift Kit is specifically designed for Chevrolet Beretta models from 1987 to 1995, as well as the 1996 variant. This lift kit is an excellent choice for those looking to enhance their Beretta's ground clearance while maintaining a balanced and stable ride.

Each kit comes with a set of high-quality, heavy-duty coil spring spacers. These spacers are engineered to fit perfectly between the stock coil springs and the Beretta's rear axle. By increasing the distance between the springs and the axle, the spacers allow for more travel and greater suspension articulation, resulting in a noticeable lift.

The LABT MP1627 Rear Coil Spring Spacer Lift Kit is manufactured using durable steel, ensuring strength and longevity. The spacers are also powder-coated for added protection against the elements, ensuring a long-lasting, attractive finish.

Installation of the lift kit is a straightforward process. The spacers can be installed without the need for any major modifications to the vehicle. Simply remove the factory coil springs, place the spacers between the axle and the new springs, and reassemble the suspension. The kit includes all necessary hardware for installation.

By installing the LABT MP1627 Rear Coil Spring Spacer Lift Kit on your Chevrolet Beretta, you can expect to achieve a lift of approximately 1 to 1.5 inches, depending on the specific model and suspension components used. This lift height is ideal for those looking to add larger tires and wheels to their Beretta, as well as for those who simply want to improve its off-road capabilities.

In summary, the LABT MP1627 Rear Coil Spring Spacer Lift Kit is an excellent choice for Chevrolet Beretta owners looking to enhance their vehicle's ground clearance and off-road capabilities. The kit is made from high-quality, durable materials, is easy to install, and provides a noticeable lift. If you're looking to take your Beretta to the next level, this lift kit is an excellent place to start.

Pros and Cons of Buying a Labra Coil Spring Spacer Lift Kit for Chevrolet Beretta (1987-1995, 1996)

The Labra MP1627 rear coil spring spacer lift kit is designed to provide an increase in ground clearance for Chevrolet Beretta models from 1987 to 1995 and 1996. This lift kit uses spacers to raise the rear suspension without altering the factory geometry or requiring lengthy installation time. In this analysis, we will discuss the potential benefits and drawbacks of investing in this lift kit.

1. Enhanced Ground Clearance: The primary advantage of using the Labra MP1627 rear coil spring spacer lift kit is the increased ground clearance it offers. This modification can be beneficial for off-roading, as it allows the vehicle to traverse more challenging terrains without the risk of scraping the undercarriage.

2. Improved Suspension Performance: The spacers in this lift kit provide additional space between the coil springs and the vehicle's chassis. This extra space can lead to improved suspension performance by reducing stress on the springs and allowing them to function more effectively.

3. Relatively Easy Installation: Compared to other lift kit solutions, the Labra MP1627 kit offers a relatively straightforward installation process. No extensive modifications or welding are required, making it an attractive option for those who want to enhance their Beretta's off-road capabilities without investing significant time or resources.

4. Cost-Effective: The Labra MP1627 lift kit is generally more affordable than other lift kit options. This can make it an appealing choice for those on a budget who still want to improve their Beretta's off-roading capabilities.

1. Potential Ride Quality Issues: Installing this lift kit may result in altered ride quality, as the increased ground clearance can lead to a stiffer or less responsive suspension. This may not be a significant concern for those primarily using their Beretta for off-roading, but it could be a disadvantage for daily drivers.

2. Limited Lift Height: The Labra MP1627 lift kit offers a relatively modest lift height compared to other lift kit solutions. This might not be sufficient for those seeking a more substantial increase in ground clearance.

3. Potential Impact on Aerodynamics: By raising the rear suspension, the Labra MP1627 lift kit could potentially affect the Beretta's aerodynamics. This could lead to increased wind resistance and reduced fuel efficiency, although the impact is likely to be minimal.

The Labra MP1627 rear coil spring spacer lift kit for the Chevrolet Beretta (1987-1995, 1996) offers a number of benefits, including enhanced ground clearance, improved suspension performance, and a relatively straightforward installation process. However, it also comes with potential drawbacks, such as altered ride quality and minimal lift height. Ultimately, the decision to invest in this lift kit depends on your specific needs and preferences. If you prioritize off-roading capabilities and are willing to accept the potential trade-offs, the Labra MP1627 lift kit could be a worthwhile investment. Alternatively, if you require a more substantial lift height or prioritize ride quality over off-roading capabilities, you may want to consider other lift kit options or alternative modifications.

Details:

Warranty information the most products has months warranty. 1 rear coil spring spacer lift kit pair for Chevrolet Beretta 1987 -1995 1996. Lift amount 1.: set of 1 billet aluminum rear coil spring spacers for 60s thru 90s wheel drive gm ford cars.

New list item. Excellent delivery. Costs less than new or custom springs. Taller top spring perch for increased safety.

Lablt has rich experience in the production, sales and after-sales service of automobile motorcycle parts. Solid billet aluminum: stronger more durable than cast aluminum, poly or plastic. Part #: MP1627. Application for.

Gold anodized: for superior protection. See below for exact applications. Kit includes instructions.

specifications liftkitsparts:

• for models: Beretta
• for makes: Chevrolet
• for years: 1987–1996
• brand: Lablt
• mpn: Mp1627
• country of origin: United States
• placement on vehicle: Rear
• manufacturer warranty: 1 Year
• color: Yellow
• notes: Performance/custom
• material: Billet Aluminum
• type: Suspension Lift Kit
• lift height: 1 Rear
• items included: Kit-shock Absorber
• features: Easy To Replace
• performance part: No

shipping liftkitsparts:

• class: standard
• type: fixed
• service: standard
• transit: 5-8 days

payments liftkitsparts:

• other
• wallet: apple-pay
• credit card: visa

general liftkitsparts:

• category: Auto Parts > Chassis, Suspension Brakes > Lift Kits

offer liftkitsparts:

• availability: in stock
• started: april 16, 2026
• prices: $33.34–$74.99
• item condition: New
• sold #: 6
• best offers: true
• options: ship-to-home

returns liftkitsparts:

• paid by: seller
• policy: returns accepted
• time: 30 days

seller liftkitsparts:

• # reviews: 30343
• rating: 99.5%
• city: monroe township, new jersey