EGQP1050 EG-AUTO Front Track Bar Sector Shaft Brace Jl Jlu Jt

Review EG-AUTO Front Track Bar And Sector Shaft Brace For Jeep Jl Jlu Jt for JEEP WRANGLER 2018–2023

Introducing the AutoMeter EGQP1050 8869-01 Front Track Bar Sector Shaft Brace, a high-performance upgrade for the front suspension system of select Jeep Wrangler JL, JLU, and JT models from 2018 to 2023. This track bar brace is engineered to provide enhanced durability and rigidity to your Jeep's front end, ensuring superior off-road capabilities and improved handling.

Manufactured from heavy-duty steel tubing, this sector shaft brace boasts a robust construction designed to withstand the demands of off-road driving. The brace features a precision-engineered design that mounts to the Jeep's existing front track bar mounting points, ensuring a perfect fit and easy installation.

The AutoMeter EGQP1050 8869-01 Front Track Bar Sector Shaft Brace is specifically designed to address the weak point in the factory track bar setup, which can flex under heavy off-road use. By reinforcing the connection between the front and rear axles, this brace significantly reduces flex and improves the overall stability and control of your Jeep.

* CNC-machined ends for precise fitment and superior strength

* Powder-coated finish to resist rust and corrosion

* Designed and manufactured in the USA

* Easy bolt-on installation using the factory track bar mounting points

* Compatible with aftermarket suspension lifts up to 4 inches

By upgrading your Jeep Wrangler with the AutoMeter EGQP1050 8869-01 Front Track Bar Sector Shaft Brace, you'll not only enhance its off-road prowess but also improve its on-road handling and overall durability. Trusted by off-road enthusiasts and Jeep owners alike, this brace is a must-have upgrade for anyone looking to take their Jeep to new heights.

Pros and Cons of buying a AutoPilot Performance EGQP1050 8869-01 Front Track Bar Sector Shaft Brace for 18-23 Jeep Wrangler JL JLU JT

- Enhances the rigidity of the front suspension, providing better handling and improved off-road performance.

- Reduces wheel hop during hard acceleration or landing from jumps, improving traction and control.

- Made from high-strength steel, ensuring long-lasting use.

- Designed to withstand the harsh conditions of off-road driving, making it a worthwhile investment for those who frequently take their Jeep off the beaten path.

- Bolts directly onto the existing track bar, requiring no major modifications or fabrication.

- Includes all necessary hardware for installation, making it a relatively straightforward process for most Jeep owners.

- Increased weight: Since it's made from steel, the brace adds some extra weight to the front end of the Jeep. This might not be an issue for most, but it could affect fuel economy slightly.

- Cost: Compared to other aftermarket front track bar braces, the AutoPilot Performance EGQP1050 8869-01 might be on the pricier side. However, the benefits often outweigh the cost for serious off-road enthusiasts.

The AutoPilot Performance EGQP1050 8869-01 Front Track Bar Sector Shaft Brace is an excellent investment for those who frequently take their 18-23 Jeep Wrangler JL, JLU, or JT off the road. Its ability to enhance performance, improve durability, and offer easy installation makes it a worthwhile addition for serious off-road enthusiasts. While there are some potential drawbacks, such as increased weight and cost, the benefits generally outweigh these concerns.

If you're an off-road enthusiast looking to improve the handling, durability, and overall performance of your Jeep Wrangler JL, JLU, or JT, the AutoPilot Performance EGQP1050 8869-01 Front Track Bar Sector Shaft Brace is a solid choice. Its high-quality construction, ease of installation, and noticeable performance improvements make it a valuable investment for those who take their Jeep off the pavement regularly.

Details:

Do not install the nut. 2.the holes for the track bar bolt in mount and your new brace might not line up right away, thick factory welds prevented from fitting nicely. If using an aftermarket front track bar,the springs should be removed and the suspension cycled to full bump determine stop spacing. Remove all four steering box bolts.

This is not a replacement track bar bracket. Periodically check and make sure that all the bolts in your steering system are tight. I would suggest that you support it with a bottle/scissor jack and piece of wood you want to make sure the steering box remains in its place. 2 material track bar brace laser cut and CBC formed from 3/16 inch high strength steel.

Installation steps. 3.install the track bar back into mount and push bolt with washer through. Enjoy your new beefy track bar brace. Note, these two bolts need to be installed with nut on the outside of bracket clear your track bar.

The solution was to install the two bolts provided, with washers under both bolt and nut, at this time, push brace firmly onto mount. You might want to inspect all of the joints once in a while too, and replace if necessary. This is a brace to reinforce the stock frame-side front track bar bracket. Using a permanent marker, draw line on the track bar bolt or nut and brace, to check after driving for while if everything remains tight did not loosen.

1 replace part number: 8069-01. Fits for 2018 -2022 Jeep Wrangler jl jlu gladiator jt sports Sahara freedom Rubicon 2-door 4-door. Install the nut with washer and hand tighten it. Sector shaft brace CBC machined from 6061-t6 aluminum with press-fit steel brass fitting.

Reach under the steering box and support it as last bolt is being removed. Excellent mechanical and physical properties ensure great corrosion resistance durability. Install the track bar brace by fitting it over factory mount and installing bolt provided in kit. If using PCs big bore steering box kit it is necessary to use the synergy mfg.

The bolt is just to hold the bracket in place for time being.

specifications liftkitsparts:

• for models: Wrangler
• for makes: Jeep
• for years: 2018–2023
• brand: Eg-auto
• mpn: Egqp1050
• warranty: 1years
• part type: Suspension Lift Kit Bracket Kit
• placement on vehicle: Front
• applcation 1: For 2018 2019 2020 2021 Jeep Wrangler Jl Jlu
• applcation 2: For 2020 2021 Jeep Gladiator Jt
• material: Steel
• color: Black
• item weight: 6.46 Pounds
• type: 8869-01 Front Track Bar Sector Shaft Brace Kit
• oe/oem part number: 8869-01

payments liftkitsparts:

• wallet: paypal
• credit card: visa
• other

offer liftkitsparts:

• availability: in stock
• options: ship-to-home
• sold #: 14
• in stock #: 1
• best offers: true
• started: october 11, 2025
• price: $174.10
• item condition: New

returns liftkitsparts:

• policy: returns accepted
• time: 60 days
• paid by: seller

shipping liftkitsparts:

• carrier: usps
• service: usps first class
• class: standard
• type: fixed
• transit: 5-11 days

seller liftkitsparts:

• city: walton, kentucky
• rating: 100.0%
• # reviews: 568

general liftkitsparts:

• category: Auto Parts > Chassis, Suspension Brakes > Lift Kits