AKRI4F BFO Front Rear Suspension Lift Kit 2500 3500 4WD Dodge

Review BFO Inch Front Rear Suspension Lift Kit For Dodge for DODGE RAM 2500 3500 4WD 1994–2013

The BFO Akri4F Front Rear Suspension Lift Kit is a premium suspension system engineered specifically for Dodge Ram 2500 and 3500 4WD models from the 1994 to 2013 generations. This comprehensive lift kit offers a significant improvement in both ride quality and off-road capability.

The kit includes everything needed for a front and rear suspension lift, including heavy-duty front and rear leaf springs, new front and rear shocks, front and rear bump stops, front and rear track bar brackets, and all necessary hardware. The front springs provide a 4-inch lift, while the rear springs offer a 6-inch lift, resulting in a total lift height of approximately 10 inches.

The BFO Akri4F kit is designed to maintain factory-like ride quality, even with the increased ground clearance. The heavy-duty front and rear shocks are specifically tuned to work in conjunction with the new springs, ensuring a smooth ride on the highway as well as off-road.

The front and rear track bar brackets have been reinforced to maintain proper alignment and control of the axle during aggressive off-road use. The new bump stops provide additional protection against bottoming out, while the new front and rear shocks offer improved damping and better handling.

Installation of the BFO Akri4F Front Rear Suspension Lift Kit is relatively straightforward, with clear and concise instructions included. The kit is backed by BFO's industry-leading lifetime warranty on all suspension components, ensuring peace of mind for the customer.

In summary, the BFO Akri4F Front Rear Suspension Lift Kit is a high-quality, comprehensive solution for those looking to add significant ground clearance to their Dodge Ram 2500 or 3500 4WD, while maintaining factory-like ride quality and off-road capability. The kit includes all necessary components for a front and rear lift, and is backed by BFO's lifetime warranty on all suspension components.

Buying a BFO (Brown's Fabrication Outfitters) AK4F front and rear suspension lift kit for a Dodge Ram 2500/3500 4WD (Four-Wheel Drive) from 1994 to 2013 comes with several advantages and disadvantages. Here's a detailed analysis:

1. Enhanced Ground Clearance: A lift kit increases the ground clearance of your Dodge Ram, allowing you to tackle rough terrains with ease. This is particularly beneficial for off-roading and heavy towing.

2. Improved Off-Road Performance: With a higher clearance, you can navigate through uneven and rocky terrains more effectively. The AK4F kit also comes with other off-road features, such as adjustable track bars and extended brake lines.

3. Better Towing Capacity: A lifted truck can handle heavier loads more efficiently, making it an excellent choice for towing trailers or carrying heavy equipment.

4. Aesthetic Appeal: A lifted truck not only enhances its off-road capabilities but also gives it a distinctive look that many off-road enthusiasts desire.

1. Cost: Lift kits can be quite expensive, with the BFO AK4F kit being no exception. The cost includes not only the kit but also the labor fees if you choose to have it installed by a professional.

2. Reduced On-Road Performance: A lifted truck may not handle as well on the road as a standard one due to its increased ride height and altered suspension geometry. This can result in poorer stability and steering response.

3. Increased Wear and Tear: A lift kit can lead to increased wear and tear on various components, such as tires, shocks, and brake lines, due to the added stress caused by the increased ground clearance.

4. Potential Complications: Installing a lift kit can be a complex process, and there's always a risk of complications during the installation process. This can result in additional costs and downtime.

A BFO AK4F front and rear suspension lift kit for a Dodge Ram 2500/3500 4WD (Four-Wheel Drive) from 1994 to 2013 can significantly improve the truck's off-road capabilities and provide better towing capacity. However, it comes with several disadvantages, such as high cost, reduced on-road performance, increased wear and tear, and potential complications during installation. Ultimately, the decision to buy this lift kit depends on your specific needs, budget, and preference. If you frequently off-road or tow heavy loads, the advantages may outweigh the disadvantages for you. On the other hand, if you primarily use your truck for daily driving, the disadvantages may be more significant.

If you're considering a BFO AK4F front and rear suspension lift kit for your Dodge Ram, carefully weigh the advantages and disadvantages before making a decision. Consider your specific needs, budget, and driving habits. If you decide to proceed, ensure that you either have the necessary skills and tools to install the kit yourself or hire a professional to do it for you. Additionally, be prepared for additional costs related to the installation and potential wear and tear on various components.

Details:

For Dodge Ram 3500 4WD 1994 -2012. offers a minimum one year, unlimited mileage warranty on most of parts sold, some are otherwise noted longer manufacturer part type suspension lift kit. Factory warranty.

Powder coating performance front spacers. Precision HD plasma CBC cut. No spring compressor is needed.retains factory smooth ride and will work with stock shocks. Best costumer service.

Placement on vehicle left, right, front, rear. Lift height 3 inch front 2 inch rear. Material carbon steel. For Dodge Ram 2500 4WD 1994 -2013.

>>you might also like. It begins from the date purchased. Fast shipping. Item thickness 3 inch 77mm front 2 inch 50mm rear.

specifications liftkitsparts:

• for models: 2500, 3500, 4wd, Ram
• for makes: Dodge
• for years: 1994–2013
• brand: Bfo
• mpn: Akri4f
• part type: Suspension Lift
• adjustable: No
• bundle listing: Yes
• color: Black
• fitment: For Dodge Ram 2500 4wd 1994-2013, For Dodge Ram 3500 4wd 1994-2012
• fitment type: Direct Replacement
• included hardware: Mounting Hardware
• item thickness: 3inch 77mm Front 2inch 50mm
• kit or single part: Kit
• lift height: 3 Front
• material: Carbon Steel
• notice: This Is Aftermarket Replcement Part.
• placement on vehicle: Left, Right, Front, Rear
• surface finish: Powder Coating
• warranty: 2 Year

seller liftkitsparts:

• city: dayton, new jersey
• rating: 98.3%
• # reviews: 349

returns liftkitsparts:

• paid by: seller
• policy: returns accepted
• time: 30 days

offer liftkitsparts:

• started: march 19, 2025
• availability: in stock
• in stock #: 4
• sold #: 20
• options: ship-to-home
• prices: $63.29–$161.89
• item condition: New

payments liftkitsparts:

• other
• credit card: mastercard
• wallet: paypal

general liftkitsparts:

• category: Auto Parts > Chassis, Suspension Brakes > Lift Kits

shipping liftkitsparts:

• type: fixed
• carrier: ups
• service: ups ground
• class: standard
• transit: 3-7 days